Product Description
Trade Show Exhibit Display Booth Sys050
Trade Show Exhibit Display Booth 20×20 F34-701
20-Foot Truss Trade Show Booth – Circular Arches Crossover Truss Design
Custom Powder Coat Finishes Available Upon Request
Smaller Truss Segment Lengths Available Upon Request
The truss booth system can typically be set-up by three to four people who are familiar with the truss booth system and the only tools required would be a steel hammer, and M10 Hex Allen Wrench Key.
The truss booth can be expanded to a larger size by adding additional pieces from our F34 Square Aluminum Truss series. Our line of 50mm 1.96″ – Clamps were specifically developed for this truss system.
Do not exceed the load capacity of the F34 Truss Booth System. The F34 Truss Booth System should be fully inspected before use. In the occurrence of any damage or defect, the F34 Truss Booth System should not be used. The use of sand bags is recommended for maximum security.
Specificaions:
- Trade Show Exhibit Display Booth 20×20 F34-701
- 20-Foot Circular Arches Crossover Truss Trade Show Booth Design
- Lightweight Square Truss joins in minutes with the use of a Steel Hammer
- 19.68-foot Overall Truss Booth Width
- 19.68-foot Overall Truss Booth Length
- 9.97-foot Overall Truss Booth Height
- General Truss Information
- F34 Square Aluminum Truss
- 11 7/16″ 290mm Overall Truss Width
- 2″ 50mm Outer Diameter Tubing
- 3/4″ 20mm Diagonal Bracing
- 0.08″ 2mm Wall Thickness
- Approximate Weight – 390 Lbs.
- Connecting Hardware Included
- Aluminum Brush Finish
