Product Description
Trade Show Exhibit Display Booth Sys038
Trade Show Exhibit Display Booth 12×20 F24-303FS
12′ x 20′ Truss Trade Show Booth Made With Open Front and Center Beam
Custom Powder Coat Finishes Available Upon Request
The truss booth system can typically be set-up by three to four people who are familiar with the truss booth system and the only tool required would be a steel hammer.
The truss booth can be expanded to a larger size by adding additional pieces from our F24 Square Aluminum Truss series. Our line of 35mm 1.37″ – Clamps were specifically developed for this truss system.
Do not exceed the load capacity of the F24 Truss Booth System. The F24 Truss Booth System should be fully inspected before use. In the occurrence of any damage or defect, the F24 Truss Booth System should not be used. The use of sand bags is recommended for maximum security.
Specificaions:
- Trade Show Exhibit Display Booth 10×20 F34-801
- Open Front and Center Beam Truss Design
- Entire Truss Booth Can Be Shipped In a Collapsible Container or As Single Pieces Via FedEx/UPS
- In-Line 12×20 Truss Trade Show Booth
- Lightweight Square Truss constructs in minutes with the use of a Steel Hammer
- 11.48-foot Overall Truss Booth Width
- 19.68-foot Overall Truss Booth Length
- 9.84-foot Overall Truss Booth Height
- General Truss Information
- F24 Square Aluminum Truss
- 8.66″ 220mm Truss Overall Width
- 1.37″ 35mm Truss Outer Diameter Tubing
- 0.32″ 8.30mm Truss Diagonal Bracing
- 0.078″ 2mm Truss Wall Thickness
- Approximate Weight – 244 Lbs.
- Connecting Hardware Included
- Aluminum Brush Finish
