Trade Show Exhibit Display Booth 10×20 F34-501
10′ x 20′ Truss Trade Show Booth with Center Beam – Re-Configurable F34 Square Truss Kit

Truss Booth is modular and can be set up in 4 different configurations.

Engineering Report Available, Enquire About Costs
Custom Powder Coat Finishes Available Upon Request
Smaller Truss Segment Lengths Available Upon Request

Aluminum Truss is usually very lightweight and can be transported in collapsible containers or truss bags.

The truss booth system can typically be set-up by three to four people who are familiar with the truss booth system and the only tools required would be a steel hammer, and M10 Hex Allen Wrench Key.

The truss booth can be expanded to a larger size by adding additional pieces from our F34 Square Aluminum Truss series. Our line of 50mm 1.96″ – Clamps were specifically developed for this truss system.

Specificaions:

• Trade Show Exhibit Display Booth 10×20 F34-501
• You Create 4 Different Booth Configurations
• In-Line 10×20 Truss Trade Show Booth
• Lightweight Square Truss assembles in minutes with the use of a Steel Hammer.
• Max Load of 150-Lbs. Per Linear Foot On 10-Foot Span, Max Load of 80-Lbs. Per Linear Foot On 20-Foot Span.
• 9.97-foot Overall Truss Booth Width
• 19.25-foot Overall Truss Booth Length
• 9.97-foot Overall Truss Booth Height
• General Truss Information
  • F34 Square Aluminum Truss
  • 11 7/16″ 290mm Overall Truss Width
  • 2″ 50mm Outer Diameter Tubing
  • 3/4″ 20mm Diagonal Bracing
  • 0.08″ 2mm Wall Thickness
  • Approximate Weight – 570 Lbs.
  • Connecting Hardware Included
  • Aluminum Brush Finish