Trade Show Exhibit Display Booth 10×20 F33-101
10′ x 20′ Truss Trade Show Booth – Modular F33 Triangular Truss System

Custom Powder Coat Finishes Available Upon Request
Smaller Truss Segment Lengths Available Upon Request

The truss booth system can typically be set-up by three to four people who are familiar with the truss booth system and the only tool required would be a steel hammer.

The truss booth can be expanded to a larger size by adding additional pieces from our F33 Triangular Aluminum Truss series. Our line of 50mm 1.96″ – Clamps were specifically developed for this truss system.Truss Booth can be used as a small island booth or inline booth.

Do not exceed the load capacity of the F33 Truss Booth System. The F33 Truss Booth System should be fully inspected before use. In the occurrence of any damage or defect, the F33 Truss Booth System should not be used. The use of sand bags is recommended for maximum security.

Specificaions:

• Trade Show Exhibit Display Booth 10×20 F33-201
• You Create 2 Different Booth Configurations
• In-Line 10×20 Truss Trade Show Booth
• Lightweight I-Beam Truss assembles in minutes with the use of a Steel Hammer
• 9.84-foot Overall Truss Booth Width
• 19.68-foot Overall Truss Booth Length
• 9.84-foot Overall Truss Booth Height
• General Truss Information
  • F33 Triangular Aluminum Truss
  • 11 7/16″ 290mm Overall Truss Width
  • 2″ 50mm Outer Diameter Tubing
  • 3/4″ 20mm Diagonal Bracing
  • 0.08″ 2mm Wall Thickness
  • Approximate Weight – 354 Lbs.
  • Connecting Hardware Included
  • Aluminum Brush Finish