Trade Show Exhibit Display Booth 10×20 F24-202FS
10′ x 20′ Truss Trade Show Booth Made With Open Front

Trade Show Exhibit Display Booth uses F24 Square Aluminum Truss, The trade show booth can be shipped in a collapsible container or the individual pieces can be shipped via FedEx/UPS. Collapsible Shipping Container Sold Separate.
10′ x 20′ 4 Leg Truss Trade Show Booth is EXCELLENT for any company that needs a UNIQUE mere trade show presence.

Aluminum Truss is usually very lightweight and can be transported in small custom cases or truss bags.

Custom Powder Coat Finishes Available Upon Request
Smaller Truss Segment Lenghts Available Upon Request

The truss booth system can typically be set-up by three to four people who are familiar with the truss booth system and the only tool required would be a steel hammer.

The truss booth can be expanded to a larger size by adding additional pieces from our F24 Square Aluminum Truss series. Our line of 35mm 1.37″ – Clamps were specifically developed for this truss system.

Do not exceed the load capacity of the F24 Truss Booth System. The F24 Truss Booth System should be fully inspected before use. In the occurrence of any damage or defect, the F24 Truss Booth System should not be used. The use of sand bags is recommended for maximum security.

Specificaions:

• Trade Show Exhibit Display Booth 10×20 F24-202FS
• Open Front Truss Design
• Entire Truss Booth Can Be Shipped In a Collapsible Container or As Single Pieces Via FedEx/UPS
• In-Line 10×20 Truss Trade Show Booth
• Lightweight Square Truss constructs in minutes with the use of a Steel Hammer
• 9.84-foot Overall Truss Booth Width
• 19.68-foot Overall Truss Booth Length
• 9.84-foot Overall Truss Booth Height
• General Truss Information
  • F24 Square Aluminum Truss
  • 8.66″ 220mm Truss Overall Width
  • 1.37″ 35mm Truss Outer Diameter Tubing
  • 0.32″ 8.30mm Truss Diagonal Bracing
  • 0.078″ 2mm Truss Wall Thickness
  • Approximate Weight – 167 Lbs.
  • Connecting Hardware Included
  • Aluminum Brush Finish