Trade Show Exhibit Display Booth 10×20 F24-201
10′ x 20′ Truss Trade Show Booth Made With Modular F24 Square Truss
Trade Show Exhibit Display Booth uses F24 Square Aluminum Truss. 10′ x 20′ 4 Leg Truss Trade Show Booth is EXCELLENT for any company that needs a UNIQUE mere trade show presence.

Aluminum Truss is usually very lightweight and can be transported in small custom cases or truss bags.

Custom Powder Coat Finishes Available Upon Request
Smaller Truss Segment Lengths Available Upon Request

The truss booth system can typically be set up by three to four people who are familiar with the truss booth system and the only tool required would be a steel hammer.

The truss booth can be expanded to a larger size by adding additional pieces from our F24 Square Aluminum Truss series. Our line of 35mm 1.37″ – Clamps were specifically developed for this truss system.

Do not exceed the load capacity of the F24 Truss Booth System. The F24 Truss Booth System should be fully inspected before use. In the occurrence of any damage or defect, the F24 Truss Booth System should not be used. The use of sand bags is recommended for maximum security.

Specificaions:

• Trade Show Exhibit Display Booth 10×20 F24-201
• You Create 2 Different Booth Configurations
• In-Line 10×20 Dual Center Beams Truss Trade Show Booth
• Lightweight Triangular Truss assembles in minutes with the use of a Steel Hammer
• 9.84-foot Overall Truss Booth Width
• 19.68-foot Overall Truss Booth Length
• 9.84-foot Overall Truss Booth Height
• General Truss Information
  • F24 Square Aluminum Truss
  • 8.66″ 220mm Truss Overall Width
  • 1.37″ 35mm Truss Outer Diameter Tubing
  • 0.32″ 8.30mm Truss Diagonal Bracing
  • 0.078″ 2mm Truss Wall Thickness
  • Approximate Weight – 232 Lbs.
  • Connecting Hardware Included
  • Aluminum Brush Finish