Product Description
Trade Show Exhibit Display Booth Sys022
Trade Show Exhibit Display Booth 10×10 F34-132
10×10 Trade Show Truss Booth with Center I-Beam
Custom Powder Coat Finishes Available Upon Request
Smaller Truss Segment Lengths Available Upon Request
The truss booth system can typically be set-up by two to three people who are familiar with the truss booth system and the only tools required would be a steel hammer, and M10 Hex Allen Wrench Key.
The truss booth can be expanded to a larger size by adding additional pieces from our F34 Square Aluminum Truss series. Aluminum Truss is usually very lightweight and can be transported in collapsible containers or truss bags. Our line of 50mm 1.96″ – Clamps were specifically developed for this truss system.
Specificaions:
- Trade Show Booth Design 10×10 F34-132
- 10×10 Trade Show Truss Exhibit Display with Center I-Beam
- Lightweight Square Truss assembles and dismantles in minutes with the use of a Steel Hammer
- 10-foot Overall Truss Booth Width
- 8.20-foot Inside Truss Booth Width
- 10-foot Overall Truss Booth Length
- 8.20-foot Inside Truss Booth Length
- 9.97-foot Overall Truss Booth Height
- 9.02-foot Inside Truss Booth Height
- General Truss Information
- F34 Square Aluminum Truss
- 11 7/16″ 290mm Overall Truss Width
- 2″ 50mm Outer Diameter Tubing
- 3/4″ 20mm Diagonal Bracing
- 0.078″ 2mm Wall Thickness
- Approximate Weight – 428 Lbs.
- Connecting Hardware Included
- Aluminum Brush Finish