10′ x 10′ Truss Trade Show Booth – Modular F24 Square Trussing Booth

Custom Powder Coat Finishes Available Upon Request
Smaller Truss Segment Lengths Available Upon Request

The truss booth system can typically be set-up by two to three people who are familiar with the truss booth system and the only tools required would be a steel hammer, and M8 Hex Allen Wrench Key.

The truss booth can be expanded to a larger size by adding additional pieces from our F24 Square Aluminum Truss series. Our line of 35mm 1.37″ – Clamps were specifically developed for this truss system.

Do not exceed the load capacity of the F24 Truss Booth System. The F24 Truss Booth System should be fully inspected before use. In the occurrence of any damage or defect, the F24 Truss Booth System should not be used. The use of sand bags is recommended for maximum security.

Specificaions:

• In-Line 10×10 Truss Trade Show Booth
• Lightweight Square Truss constructs in minutes with the use of a Steel Hammer
• 9.64-foot Overall Truss Booth Width
• 9.64-foot Overall Truss Booth Length
• 9.64-foot Overall Truss Booth Height
• General Truss Information : F24 Square Aluminum Truss, 8.66″ 220mm Truss Overall Width, 1.37″ 35mm Truss Outer Diameter Tubing, 0.32″ 8.30mm Truss Diagonal Bracing, 0.078″ 2mm Truss Wall Thickness
• Approximate System Weight : 190 Lbs
• Connecting Hardware Included, Aluminum Brush Finish