10-Foot Temporary Aluminum Truss Structure
Complete Modular Trade Show Exhibit Display Booth uses F23 Triangular Aluminum Truss. 10′ x 10′ 4 Leg Truss Trade Show Booth is EXCELLENT for any company that needs a UNIQUE real trade show presence. Aluminum Truss is usually very lightweight and can be transported in small custom cases or truss bags.

Engineering Report Available, Enquire About Costs
Custom Powder Coat Colors available on request with a variety of finishes from matte to gloss.

The truss booth system can typically be set-up by two to three people who are familiar with the truss booth system and the only tool required would be a steel hammer.

The truss booth can be expanded to a larger size by adding additional pieces from our F23 Triangular Aluminum Truss series. Our line of 35mm 1.37″ – Clamps were specifically developed for this truss system. Truss Booth can be used as a small island booth or inline booth.

STRUCTURE HAS BEEN DESIGNED FOR MAX RIGGING OF 65 POUNDS PER LINEAR FOOT ON EACH SPAN. RIGGING ASSUMES NO BRIDLING. WHEN USING A REAR SCRIM, THE STRUCTURE REQUIRES 800-LBS. BALLAST ON EACH CORNER OR ANCHORAGE TO CONCRETE SLAB. Do not exceed the load capacity of the F23 Truss Booth System. No loads are permitted or should be supported from the connection point of the trusses. The F23 Truss Booth System should be fully inspected before use. In the occurrence of any damage or defect, the F23 Truss Booth System should not be used. The use of sand bags is recommended for maximum security.

Specificaions:

• Trade Show Exhibit Display Booth 10×10 F23-101
• 10×10 Trade Truss Show Booth Display
• Lightweight Triangular Truss constructs in minutes with the use of a Steel Hammer
• Max Load of 65-Lbs. Per Linear Foot On Each Span
• 9.84-Foot Overall Truss Booth Width
• 9.84-Foot Overall Truss Booth Length
• 9.84-Foot Overall Truss Booth Height
• General Truss Information : F23 Triangular Aluminum Truss, 8.66-Inch 220mm Truss Overall Width, 1.37-Inch 35mm Truss Outer Diameter Tubing, 0.32-Inch 8.30mm Truss Diagonal Bracing, 0.078-Inch 2mm Truss Wall Thickness
• Approximate Weight – 160 Lbs.
• Connecting Hardware Included Aluminum Brush Finish.