Product Description
Custom Truss System Sys007
Custom Powder Coat Finishes Available Upon Request
Smaller Truss Segment Lengths Available Upon Request
The truss system includes F34 Square Trussing for the Header and Towers, it also includes F32 I-Beam for the Center Leg Towers.
The truss system can typically be set-up by three to four people who are familiar with the truss system and the only tool required would be a steel hammer.
The truss system can be expanded to a larger size by adding additional pieces from our F34 Square Aluminum Truss series. Aluminum Truss is usually very lightweight and can be transported in collapsible containers or truss bags. Our line of 50mm 1.96″ – Clamps were specifically developed for this truss system.
Do not exceed the load capacity of the F34 Truss System. The F34 Truss Booth System should be fully inspected before use. In the occurrence of any damage or defect, the F34 Truss Booth System should not be used. The use of sand bags is recommended for maximum security.
Specificaions:
- 30' × 40' Custom Truss System with Nine Legs
- 29.52-foot Overall Truss System Width
- 39.36-foot Overall Truss System Length
- 9.84-foot Overall Truss System Height
- Dimension : 11.41″ 290mm Overall Truss Width
- Main Tubing : 1.96″ 50mm Outer Diameter Tubing, 0.08″ 2mm Wall Thickness
- Brace Tubing : 0.78″ 20mm Diagonal Bracing, 0.078″ 2mm Wall Thickness
- Material : Aluminum Alloy EN AW-6082 T6
- General Information : Connecting Hardware Included, Aluminum Brush Finish, TUV Certified
- Approximate Weight : 1385 Lbs.