Engineering Report Available, Enquire About Costs
Custom Powder Coat Finishes Available Upon Request
Smaller Truss Segment Lengths Available Upon Request

The truss system includes F62 I-Beam Trussing.
The truss system can typically be set-up by three to four people who are familiar with the truss system and the only tool required would be a steel hammer.

Our line of 50mm 1.96″ – Clamps were specifically developed for this truss system.

STRUCTURE HAS BEEN DESIGNED FOR A MAXIMUM RIGGING LOAD OF 55 POUNDS PER LINEAR FOOT. THE STRUCTURE HAS BEEN DESIGNED FOR A MAXIMUM RIGGING CENTER POINT LOAD OF 400 POUNDS. RIGGING ASSUMES NO BRIDLING. ALL POINTS SHALL BE DEAD HUNG POINTS.Do not exceed the load capacity of the F62 I-Beam Truss System. The F62 Truss Grid System should be fully inspected before use. In the occurrence of any damage or defect, the F62 Truss Grid System should not be used.

Specificaions:

• 24' × 12' Custom Truss System
• Max Load of 55-Lbs. Per Linear Foot
• 24.16-foot Overall Truss System Width
• 12-foot Overall Truss System Length
• 1.80-foot Overall Truss System Height
• Dimension : 21.65″ 550mm Overall Truss Width
• Main Tubing: 1.96″ 50mm Outer Diameter Tubing, 0.11″ 3mm Wall Thickness
• Brace Tubing: 1.18″ 30mm Diagonal Bracing
• Material : Aluminum Alloy EN AW-6082 T6
• General Information : Connecting Hardware Included, Aluminum Brush Finish, TUV Certified