Custom Powder Coat Finishes Available Upon Request
Smaller Truss Segment Lengths Available Upon Request

The truss system includes F31 Single Tube Trussing for the Header and Towers.
The truss system can typically be set-up by three to four people who are familiar with the truss system and the only tool required would be a steel hammer.

Our line of 35mm 1.37″ – Clamps were specifically developed for this truss system.

Do not exceed the load capacity of the F31 Single Tube System. The Truss System should be fully inspected before use. In the occurrence of any damage or defect, the F31 Truss System should not be used. The use of sand bags is recommended for maximum security.

Specificaions:

• 20' × 18' Custom Truss System
• 20.86-foot Overall Truss System Width
• 18.83-foot Overall Truss System Length
• 6.55-foot Overall Truss System Height
• Main Tubing: 1.96″ 50mm Outer Diameter Tubing, 0.078″ 2mm Wall Thickness
• Material : Aluminum Alloy EN AW-6082 T6
• General Information : Connecting Hardware Included, Aluminum Brush Finish, TUV Certified